EoW January 2009

wire drawing machines

Fine metal wire drawing

Shanghai Lizhi Machinery Co Ltd specialises in the research and development of micro-fine and fine metal wire drawing and annealing equipment for precious metal, non-ferrous metal, ferrous metal and stainless steel. The LZDM-80/21 wire drawing machine is suitable for drawing extremely thin, precious metal wire rod. The maximum inlet diameter is 0.12mm with a minimum finished wire diameter of 0.015mm. Machine speed is 600 metres per minute. The drawing process is completely automatic, with a PLC-programmed control system. Ten pre-programmed operations can be stored. Axial motion Shi Paixian has many kinds of platoon line ways including straight platoon, incline row of line and spherical surface row of line. The LZDM-480/01 is suitable for drawing extremely thin, precious metal wire rod bus bar. The maximum inlet wire diameter is 8mm with a minimum finished wire diameter of 1.5mm. The machine speed is 50-80 metres per minute.

The LZDM-80/21 ❍ ❍

This single-drum wiredrawing machine gradually decreases the wire diameter by threading wires through one die until the target wire diameter is reached. Settings such as drawing speed and traverse pitch can be set up for every process via a touch panel on the 10.4" colour touch screen. Shanghai Lizhi Machinery Co Ltd – China Fax : +86 21 5284 4396 Email : sheldon12150@yahoo.com.cn Website : www.sh-lizhi.com

49

EuroWire – January 2009