EoW January 2009

english technology news

New drying system for wire and cable

The hinged heads are sprung allowing any defect/ knot to pass through without any adjustment. The blowers used in the Powerpack are housed in a sturdy, stainless steel acoustic chamber that keeps noise levels well below 85dB(A). The drying heads are predominantly fabricated from stainless steel, but also utilise polyethylene for the main facing plates and plenum chamber

Air Control Industries (ACI) has intro- duced a new energy-efficient drying unit for water-cooled, insulated cable and wire. Called the DRI-Line Powerpack, ACI’s system is said to achieve superior drying efficiency compared to both compressed air and other blower-driven solutions. The drying design delivers air at high velocity very close to the surface of the product, breaking the surface tension of the retained water and allowing it to be removed. Utilising high efficiency blowers, ACI’s DRI-Line Powerpack delivers warm (80ºC/176ºF) clean, contaminant-free air at constant volume and pressures to ensure the drying process is consistent and reliable. It also has the advantage of being plug and play, as it runs off a 230V, single phase supply. A version with a 110V supply will also be available shortly.

DRI-Line Powerpack wire and cable dryer ▲ ▲

The unit can dry extruded products of 5mm to 25mm diameter at speeds over 300m/min. Its drying effectiveness is achieved by passing extruded product through a pair of hinged drying heads that deliver the high velocity airflow directly to the product.

end-caps for its hardwearing properties. Extensive customer field trials of the DRI-Line Powerpack suggest significant energy savings are possible, compared to compressed air systems, with short payback times. Air Control Industries Ltd – UK Website : www.aircontrolindustries.com

Aluminium and copper rod lines for any demand

(1) Casting machine, (2) sensor arm, (3) manual bar shear, (4) conveyor, (5) Micromill 69/7 – based on the use of 7 three-roll stands mod.69 (6) rod deflector and basket coiler, ▲ ▲ (7) Additional breakdown mill to upgrade production in a second step

The aluminium and copper market is continuously evolving. International aluminium customers are looking for improve- ments while focusing their demand on special sizes to be applied to aluminium and copper production lines. During the past five years the rod producers’ main interest has been in medium (8 T/h) and large (13 T/h) capacity rod lines. Properzi has manufactured and installed lines of this type throughout the world, while extending its production range at the opposite ends of the spectrum with an XS and an XXL line. Two years ago, during this wave of evolution and increased production, Continuus-Properzi designed an aluminium line to produce approximately 1.6 T/h of grade rod in the standard diameter of 9.5mm.

This small line was nicknamed the Properzi Baby line and its main components are shown in the diagram. Giulio Properzi, president of Continuus-Properzi, is designing and developing XXL rod lines to complete the Properzi range. These include an aluminium rod line for 20 T/h, a copper rod line for 45 T/h and an ingot casting machine for 30 T/h. At present there are over 24 sizes and models of aluminium and copper rod lines in the Properzi repertoire, ranging from XS up to XXL.

Continuus-Properzi SpA – Italy Fax : +39 02 98 10 358 Email : sales@properzi.it Website : www.continuus-properzi.com

34

EuroWire – January 2009