EOW May 2014

Wire Expo 2014

6 – 7 May

➣➢➣ standards regarding raw materials, density and surface nish with each nished part subjected to two separate levels of end control. Customers can choose from over 2,000 drawings for standard machines like Nieho , SAMP, Herborn, Henrich or Syncro.

as individual solutions, with standard hardened and chrome-coated rollers or with special coatings like ceramic or tungsten carbide. Straighteners come with standard quick opening levers and cover material diameters from 0.02" to 1.6", either with V-grooved rollers or custom radius grooved rollers. Cemanco – USA Website : www.cemanco.com Clinton Instruments will introduce a new addition to the ST-CAL calibration system, the Sensitivity Module, SM. This equipment will check the spark tester’s fault detection sensitivity and will assure compliance with EN50356 (IEC/CEI 62230). The system utilises a rotating spark gap that controls arc duration and gap distance. When the test is initiated, the SM will produce a speci c number of controlled faults, which the spark tester must correctly identify to meet the norm. The sensitivity module will work with high frequency, power mains frequency and DC spark testers from any manufacturer. Clinton Instruments Booth 105

Quality is the name of the game for Cemanco

▲

As a specialist for ceramic wear parts the company also o ers a wide selection of standard ceramics like anged eyelets, ceramic rods, tubes and bow guides in a variety of qualities and surface nishes. Pulleys and sheaves are available in a choice of materials ranging from aluminium or steel coated with ceramic or tungsten carbide to solid ceramic or composites with metal or plastic anges and solid ceramic inserts as well as plastic materials. In addition to an extensive inventory Cemanco o ers customers assistance with individual solutions. Custom parts can be provided with short turn around times even in smaller quantities. The company o ers KMK spooling traverses that are known for their cost e ciency, longevity and precision. These mechanical rolling ring drives are easy to maintain and have been the bench mark for take-up traverses for many years. Recently KMK added a dual, laser-guided, self-adjusting traverse system that automatically optimises winding results for a variety of spool types. The system has been designed as a cost e ective step towards automation and rationalisation of the spooling process providing consistently high quality winding results. Roller guides for wire and cable and wire straighteners complete Cemanco’s product programme. Guides are available in many standard sizes from stock or

The ST-CAL calibration systemwill be on display

▲

The SM is compact and portable making it easy to test units while they are installed in the factory. The operator simply selects the type of unit to be checked and will then have visual con rmation of the detection current and number of faults produced via a digital display on the front panel. Once the procedure is started the SM will complete the speci ed number of faults without additional operator input. The SM is o ered as an accessory to the ST-CAL voltage calibration unit, which allows voltage calibration of most common spark test units including AC, both mains and high frequency, as well as DC equipment. With the ST-CAL system, spark test voltages up to 30KV AC and 40KV DC can be calibrated easily.

48

www.read-eurowire.com

May 2014